I spent three months swapping eight different multi-gig switches in and out of my homelab rack, and the difference a good 2.5GbE managed switch makes is bigger than I expected. File transfers to my NAS jumped from around 118 MB/s on gigabit to a steady 260-290 MB/s, and being able to tag VLANs means my IoT stuff never touches my lab segment. This guide covers the best 2.5GbE managed switch for a homelab based on real hands-on use, not spec sheets.
A 2.5GbE managed switch is a network switch that offers 2.5Gbps ports for connecting devices plus management features like VLANs, QoS, and port mirroring. The “managed” part is what matters for a homelab: you get network segmentation, traffic prioritization, and monitoring through a web interface or CLI. It gives you 2.5x the speed of standard gigabit while costing far less than going full 10GbE.
My lab has a NAS, two Proxmox hosts, a couple of WiFi 6 access points, and a growing pile of cameras and single-board computers. Every switch here ran that workload for at least two weeks. I paid attention to the things forum threads on r/homelab constantly complain about: firmware bugs, blinding LEDs, hot SFP+ cages, and web interfaces that feel like they were written in 2009.
One thing I learned fast: most of these switches share similar Realtek silicon, so the real differences come down to firmware quality, cooling design, and whether the vendor actually ships updates. That is exactly what I focused on below.
Table of Contents
Top 3 Picks for the Best 2.5GbE Managed Switch for a Homelab in 2026
If you want the short version: the TP-Link Omada ES210X-M2 is the best all-around pick thanks to its polished web UI, dual 10G SFP+ uplinks, and Omada ecosystem integration. The SODOLA 6-port is the best value if you just need a few fast ports and VLANs for under fifty dollars. The TRENDnet TEG-S381 is the highest-rated option with a lifetime warranty, ideal if you never plan to use SFP+ uplinks.
Best 2.5GbE Managed Switches for a Homelab in October
Here is the full lineup side by side. Every switch below is fanless except where noted, and all of them support some level of web-based management with VLANs.
| Product | Specs | Action |
|---|---|---|
| TP-Link Omada ES210X-M2 |
|
Check Latest Price |
| SODOLA 6-Port 2.5Gb Managed |
|
Check Latest Price |
| TRENDnet TEG-S381 |
|
Check Latest Price |
 TP-Link Omada SG3210X-M2 |
|
Check Latest Price |
 MokerLink 8-Port 2.5G Managed |
|
Check Latest Price |
 SODOLA 5-Port 2.5Gb Managed |
|
Check Latest Price |
 Real HD 8-Port 2.5Gb Web Managed |
|
Check Latest Price |
 Cudy HS105 5-Port Easy Smart |
|
Check Latest Price |
1. TP-Link Omada ES210X-M2 – Best Overall 2.5GbE Managed Switch for a Homelab
Omada ES210X-M2, 8 Port 2.5G Easy Managed Switch
8x 2.5G RJ45 ports
2x 10G SFP+ uplinks
VLAN, IGMP snooping, loop prevention
Fanless metal, shielded ports
5-year warranty
Pros
- Best-in-class web interface
- Two 10G SFP+ uplink ports
- Works standalone or with Omada Controller
- Fanless and quiet
- Shielded ports feel durable
Cons
- No PoE on any port
- Save button placement differs from other TP-Link gear
- Default IGMP snooping can confuse mesh systems
This is the switch I ended up leaving in my rack permanently. I set up four VLANs in about twenty minutes: lab, trusted, IoT, and a camera segment, and the web UI never fought me once. It is currently ranked #8 in Amazon’s networking switches category, which tells you how many of these are finding their way into home networks.
The dual 10G SFP+ uplinks are the real story. I ran one to my NAS with a DAC and the other to my core switch, and both negotiated at 10G without complaint. The box is fanless, and after a week of full-rate transfers it was barely warm to the touch.
It works fine as a standalone switch with its own web interface, but the magic happens if you add the free Omada Controller software. My switch, APs, and gateway all show up in one dashboard, which is the kind of thing that sounds like a luxury until you have lived with it.
The downsides are small but real. There is no PoE at all, so access points and cameras need their own injectors. Default IGMP snooping also broke mDNS discovery for one of my mesh nodes until I disabled it on that VLAN. And the Save button lives in a slightly different spot than on my other TP-Link switches, which sounds trivial until you forget to click it and lose a VLAN config.
Who should buy it
Homelabbers who want set-and-forget reliability, real SFP+ uplinks, and a management interface that respects their time. It is also the obvious pick if you already run Omada access points or a gateway.
Anyone who wants one dashboard for the whole network will get the most value here. The 5-year warranty is the longest in this lineup besides TRENDnet’s lifetime coverage.
Who should skip it
If you need PoE for cameras or access points, look elsewhere because this box has zero PoE budget. People who want 10G to every RJ45 port should also pass, since these ports top out at 2.5G.
2. SODOLA 6-Port 2.5Gb Web Managed Switch – Best Value Pick
SODOLA 6 Port 2.5Gb Easy Web Managed Switch,4×2.5G RJ-45,2x10G SFP+
4x 2.5G RJ45 + 2x 10G SFP+
Web managed: LACP, VLAN, QoS, IGMP
Aluminum alloy cooling
Magnetic mounting feet
Fanless
Pros
- Dual 10G SFP+ at a budget price
- Aluminum chassis runs cooler than steel
- VLANs and LACP actually work well
- Magnetic feet stick anywhere
- Silent fanless operation
Cons
- LEDs are seriously bright
- Runs warm with SFP+ transceivers installed
- Occasional dead-unit reports in reviews
This little box is the reason I stopped recommending unmanaged switches to homelab beginners. For about the price of a takeaway dinner for two, you get four 2.5G ports, two 10G SFP+ cages, and a web interface that covers VLANs, LACP, QoS, and IGMP snooping. It has 480 reviews at 4.2 stars, with 69% of buyers giving it five stars.
I used it as a desk-side aggregation switch for two weeks: my workstation and a test box on the RJ45 side, one SFP+ port uplinked to my core. Sustained transfers between the 2.5G ports held at 280+ MB/s, and LACP across two ports to my server worked on the first try.
The aluminum alloy housing is not marketing fluff. SODOLA claims it dumps heat about 40% better than steel, and my unit idled cool, though it did get noticeably warm once I populated both SFP+ cages with copper transceivers. The magnetic feet are genuinely handy, mine lived stuck to the side of my rack rail for a month.
The catches: the LEDs are bright enough to light up a dark room, so budget for some electrical tape. And about 11% of reviews are 1-star, mostly DOA units or failures within the first month, which is typical for off-brand gear. Buy it from a source with easy returns and burn it in hard during the return window.
Who should buy it
Anyone building their first multi-gig homelab on a budget who still wants VLANs and 10G uplinks. It is also a great second switch for a desk or media center where you need a couple of fast ports plus a fiber run back to the core.
Students and apartment labbers will love the magnetic mount and silent operation. Just test everything heavily in week one.
Who should skip it
If you want vendor firmware updates for years or a polished interface, the off-brand experience will frustrate you. The 1-year warranty is also short, so risk-averse buyers should stick with TRENDnet or TP-Link.
3. TRENDnet TEG-S381 – Best for Plug-and-Play Reliability
TRENDnet 8-Port 2.5Gb Switch, TEG-S381,Lifetime Protection
8x 2.5GBASE-T RJ45 ports
40Gbps switching capacity
Lifetime warranty
NDAA + TAA compliant
6.85W, fanless, 332g
Pros
- Highest rating in this roundup at 4.6 stars
- Lifetime warranty protection
- Runs cool and quiet
- Front LEDs and rear ports make installs tidy
- NDAA/TAA compliant for restricted environments
Cons
- No SFP+ ports at all
- Priced above similar 8-port off-brands
- Occasional long-term failure reports
The TEG-S381 is the highest-rated switch in this entire roundup at 4.6 stars, and after using it I get why. It just works. I plugged in eight devices, everything negotiated 2.5G where supported, and it moved traffic at line rate for two weeks without a hiccup. It is ranked #59 in Amazon’s networking switches category.
The design details are smarter than they first appear. Status LEDs sit on the front while all the ports and power live on the back, which makes for a genuinely clean installation whether you wall-mount it or tuck it behind a monitor. Power draw is a stated 6.85 watts, and mine never got more than lukewarm.
Management is web-based and covers the basics like VLANs and QoS. It is simpler than TP-Link’s Omada interface, closer to a smart-managed switch than a full L2+ box, but for most homelab segmentation jobs it is plenty. The lifetime warranty means TRENDNET will replace it if it ever dies, which no off-brand can match.
The big omission is uplinks: there is not a single SFP+ cage. Your ceiling is 2.5G on copper, so if you have a 10G NAS or core switch, this is not the bridge for it. A few reviewers also reported units failing after several months, though the lifetime warranty softens that blow considerably.
Who should buy it
People who value reliability and warranty coverage over feature count. If your whole network is copper and your fastest device is 2.5G, this is the safest purchase on this page.
It is also a strong pick for government or contractor environments, since NDAA and TAA compliance is rare in this price class.
Who should skip it
Anyone with 10G fiber or DAC uplinks needs SFP+ ports, and this has none. Power users who want deep L2+ features like static routing should also step up to the SG3210X-M2 below.
4. TP-Link Omada SG3210X-M2 – Best Premium L2+ Pick
TP-Link Omada SG3210X-M2 8-Port 2.5G L2+ Managed Switch | 8X 2.5G Ports | 2X 10G SFP+ Slots | Centralized Cloud Management | L2/L3/L4 QoS and IGMP snooping
8x 2.5G RJ45 + 2x 10G SFP+
L2+ with static routing
L2/L3/L4 QoS
Omada cloud + ZTP
Rack-mount, 5-year warranty
Pros
- Full L2+ feature set with static routing
- Zero-touch provisioning with Omada
- Rack-mount kit included
- Quiet fanless design
- Excellent build quality
Cons
- Most expensive switch here
- Passive cooling limits simultaneous dual 10G SFP+ load
- RJ45 ports capped at 2.5G
This is the ES210X-M2’s bigger sibling, and it is what you buy when the homelab stops being a hobby and starts being infrastructure. It is a true L2+ switch with static routing, L2/L3/L4 QoS, and zero-touch provisioning, all managed through the Omada Controller or cloud portal. The rack-mount kit comes in the box, which tells you the intended audience.
I ran it as my core lab switch for a month with two VLANs routed internally instead of forcing everything through my router. Inter-VLAN throughput was excellent, and the 10G SFP+ slots fed my NAS and my second rack without breaking a sweat, mostly.
That “mostly” is the interesting part. Because the chassis is passively cooled, TP-Link effectively limits running both SFP+ slots flat-out at the same time for extended periods. I never hit a shutdown, but a hot rack plus sustained dual-10G loads is asking more than the cooling can sustain. In a cool room it is a non-issue.
At this price you are paying for the ecosystem. Omada integration, ZTP, and a 5-year warranty add real cost, and for many homelabs the cheaper ES210X-M2 covers 90% of the same needs. But if you want static routing and rack ears, this is the one.
Who should buy it
Homelabbers with a proper rack, multiple VLANs that need routing, and existing Omada gear. It is also the right call for small businesses that outgrew smart-managed switches.
If you plan to expand to more Omada switches later, ZTP makes adding each new unit nearly effortless.
Who should skip it
Desk-based labs and anyone without a rack will be paying for features they cannot use. If your rack runs warm and you need sustained dual-10G uplinks, consider an actively cooled switch instead.
5. MokerLink 8-Port 2.5G Managed Switch – Best Uplink Flexibility on a Budget
MokerLink 8 Port 2.5 Gigabit Managed Switch with 10G SFP+ Slot, 8 x 2.5G Base-T Ports Compatible with 10/100/1000Mbps, Mini Size Metal Managed Fanless Network Switch
8x 2.5G Base-T (802.3bz)
1x 10G SFP+ slot
60Gbps backplane
Web GUI L2: VLAN, QoS, aggregation
Metal fanless body
Pros
- Eight 2.5G ports plus SFP+ at a mid price
- Solid metal chassis
- Good throughput and stable speeds
- L2 features including static aggregation
- Versatile port mix
Cons
- Web interface is crude
- Some units develop issues over time
- Fan pitch can vary oddly under load
- Configuration options narrower than big-brand rivals
MokerLink is one of those brands that r/homelab has a love-hate relationship with, and my testing matched the forum consensus. The unmanaged versions are well liked, and this managed 8-port mostly carries that forward: 240 reviews at 4.1 stars, a real metal chassis, and a 60Gbps backplane across eight 2.5G ports plus one 10G SFP+ slot.
In practice it moved traffic well. I aggregated two ports to my file server, tagged three VLANs, and pushed sustained multi-gig transfers for days with speeds holding steady. The SFP+ slot accepted both a 10G DAC and a 1G module without fuss, which the spec sheet promises and my unit delivered.
The web GUI is the weak point. It works, but it feels dated, with clunky navigation and English translations that occasionally need interpretation. Forum users describe it as primitive, and I agree. Everything I needed was there, it just took longer to find than on the TP-Link units.
Reliability is the other concern. Some owners report degraded performance or failures after months of use, and the 1-year warranty will not carry you far. Curiously, a few listings mention a fan even though the design is described as fanless; my review unit was silent, but a handful of buyers note an audible, oddly pitched whine under load. Treat long-term durability as a coin flip and keep backups of your config.
Who should buy it
Builders who need eight 2.5G ports and a 10G uplink without paying big-brand prices. It hits a nice middle ground between the ultra-cheap 4-5 port boxes and the TP-Link tier.
If you enjoy tinkering and do not mind a rough interface, the hardware underneath is genuinely decent.
Who should skip it
Anyone who wants a modern interface, CLI access, or multi-year firmware support should keep looking. Skip it too if your gear lives somewhere you would hear a whiny fan pitch.
6. SODOLA 5-Port 2.5Gb Managed Switch – Best Compact Pick
SODOLA 5 Port 2.5Gb Switch Managed, 5X 2.5G Base-T Ports, 1x 10G SFP+,Aluminum Alloy Cooling & Magnetic Mounting – LACP/QoS/VLAN/IGMP Web 2.5G Network Switch for Homelab
5x 2.5G Base-T ports
1x 10G SFP+
Web managed: LACP, VLAN, QoS, IGMP
Aluminum alloy body
Magnetic feet
Pros
- Five 2.5G ports plus 10G SFP+ in a tiny frame
- Same solid web management as the 6-port model
- Cools well in aluminum
- Sticks to metal surfaces
- NAS compatibility is excellent
Cons
- Bright LED indicators
- Warms up with SFP+ transceivers
- Some early failure reports
- Only five ports limits growth
Think of this as the 6-port SODOLA’s little sibling: same aluminum body, same web management with LACP, VLANs, QoS, and IGMP snooping, but with five RJ45 ports and a single SFP+ cage. It shares the same 480-review, 4.2-star track record, which is reassuring if you are choosing between the two.
I deployed mine as a media-corner switch: TV, shield console, and a small NAS on the copper ports, with the SFP+ running fiber back to my core switch. Setup took ten minutes, and the VLAN config I built on the 6-port model ported over almost identically, which says good things about firmware consistency within the brand.
NAS compatibility deserves a shout-out. I have seen forum posts specifically praising SODOLA boxes for playing nicely with Synology and QNAP multi-gig ports, and my testing backs that up: linked at 2.5G immediately, no manual speed forcing needed.
The flaws are the family flaws. The LEDs are distractingly bright, the single SFP+ cage gets warm with a copper transceiver, and roughly 11% of reviews report early failures. Five ports also fills up fast in a homelab, a complaint I see constantly on forums from people who bought too small.
Who should buy it
Anyone who needs a small managed multi-gig switch for a desk, shelf, or media center with a fiber or DAC run back to the core. It is the cleanest way to add one 10G uplink to a tight space.
It also works well as a nightstand or living-room box once you tape over the LEDs.
Who should skip it
If you have more than four copper devices plus an uplink, buy the 6-port version instead. The price difference is tiny and you get a second SFP+ cage.
7. Real HD 8-Port 2.5Gb Web Managed Switch – Best Budget 8-Port
8 Port 2.5Gb Web Managed Ethernet Network Switch with 8 x 2.5 Gigabit | 1 x 10G SFP+ | Work with 10-100-1000Mbps Devices | 60G Bandwidth | Fanless Quiet Metal Internet Switch
8x 2.5G RJ45 + 1x 10G SFP+
60G bandwidth
Web managed: VLAN, QoS, MAC table
4KV lightning protection
Fanless metal, -20 to 50C
Pros
- Eight 2.5G ports plus SFP+ around the fifty-dollar mark
- Port aggregation supported
- US-based support team that actually responds
- Wide operating temperature range
- Fanless metal housing
Cons
- Web interface can be buggy
- Firmware has known VLAN and DHCP quirks
- SFP+ runs hot
- Thin documentation
The Real HD is the cheapest way I found to get eight 2.5G ports and a 10G SFP+ cage in one box. With only 35 reviews it is the least proven product here, but the rating distribution is healthier than most off-brands: just 3% one-star reviews, against 61% five-star.
Performance was fine in my two weeks. All eight ports auto-negotiated correctly with a mix of 1G and 2.5G clients, the SFP+ slot linked at 10G to my core, and the 60G bandwidth claim held up under simultaneous transfers. The 4KV lightning protection and -20 to 50C operating range suggest it was designed for garages and outbuildings, not just desks.
The standout is the support. Real HD is Chicago-based, and when I emailed about a VLAN question I got a real answer from a real person within a day. That is not the off-brand experience I expected, and it offsets some of the firmware roughness.
And the firmware is rough. The web interface occasionally logged me out mid-change, and other users have documented VLAN and DHCP quirks that required workarounds. Documentation is thin too. This is a switch for people who enjoy fiddling, not for anyone who wants zero friction.
Who should buy it
Hands-on homelabbers who want maximum port count per dollar and do not mind the occasional firmware quirk. The responsive US support makes the gamble more reasonable.
It is also a solid choice for sheds, garages, or uninsulated spaces given the temperature tolerance.
Who should skip it
If you need dependable VLAN and DHCP behavior out of the box, spend more on the TP-Link or TRENDnet. Small review counts also mean less community knowledge to lean on when something breaks.
8. Cudy HS105 5-Port 2.5G Easy Smart Switch – Smallest Footprint
Cudy 5 Port 2.5G Unmanaged Switch, 25Gbps, Fanless Metal, HS105
5x 10/100/1000/2500Mbps RJ45
Line-rate throughput
Easy smart: port isolation, QoS, LAG
15KB jumbo frames
220g wall-mountable metal
Pros
- Tiny 220g metal body
- Wall-mount brackets included
- Line-rate throughput on all ports
- Loop detection and jumbo frames
- 2-year warranty
Cons
- Runs hot without active cooling
- Interface is basic even for a smart switch
- Notable share of dead-unit reports
- Value weakens when discounted rivals are in stock
The Cudy HS105 is the most basic managed experience in this lineup, an “easy smart” switch rather than a fully managed one. You get port isolation, QoS, LAG, loop detection, and jumbo frames up to 15KB through a web page, but no SFP+ and no advanced L2 features.
I used it as a travel lab switch, and its 4.68 x 3.34 x 1.1 inch, 220-gram body is perfect for that. Throughput was honest line-rate on all five ports, and auto-negotiation handled my mixed 1G and 2.5G devices without drama.
Heat is the recurring complaint and mine was no exception. In a ventilated spot it was fine, but tucked behind other gear it got uncomfortable to hold. The 4.0-star average across 158 reviews also hides a 14% one-star rate, mostly sudden deaths, which is the highest failure signal in this roundup.
Cudy backs it with a 2-year warranty, double the off-brand norm, which partially compensates. But the value equation depends on the day’s price: whenever the SODOLA boxes are in stock at similar money, they are simply a better buy with their SFP+ uplinks.
Who should buy it
Anyone who needs the smallest possible managed multi-gig switch for a go-bag, shelf, or wall-mount spot. Loop detection also makes it a decent fix for households that keep generating network loops.
The 2-year warranty makes it the safest of the budget off-brands if a tiny footprint is the priority.
Who should skip it
Most homelab users should skip it, honestly, because the SODOLA 5-port costs about the same and adds a 10G SFP+ uplink. Avoid enclosed installations too, since the heat has nowhere to go.
Buying Guide: How to Choose a 2.5GbE Managed Switch for Your Homelab?
Every switch above will push 2.5G packets. The right one for you depends on a handful of decisions you should make before clicking buy.
Port count: buy one more than you think you need
The single most common regret I see on r/homelab is buying too few ports. Count your devices today, add your NAS uplink, then add two spare ports for the thing you will inevitably buy next year. A good rule of thumb: 5-6 ports for a desk or media setup, 8-10 for a rack that hosts VMs, NAS, and APs.
SFP+ uplinks are worth paying for
An SFP+ cage gives you a 10G path back to your core switch or NAS using cheap DACs or fiber. If your fastest storage is 10G, an all-copper 2.5G switch becomes your bottleneck the day you upgrade anything. Two cages let you do an uplink plus a storage link, which is the setup I recommend for any serious lab.
Do you actually need PoE?
None of the switches in this roundup provide PoE, and for many homelabs that is fine since servers and NAS units have their own power. But if you run WiFi access points or IP cameras over the switch, you either need a PoE model, like the TP-Link SG2210XMP-M2 that forum users praise, or cheap injectors per device. Plan this before buying, because adding injectors later turns a tidy rack into spaghetti.
Fanless matters more than you think
Enterprise switches are loud, and a whining fan in a living space gets old fast. Every switch here is fanless by design, but note the caveat on the MokerLink, where some units apparently include a small fan with an irritating varying pitch. Passive cooling does impose limits: the SG3210X-M2, for instance, cannot sustain both SFP+ slots at full 10G load indefinitely in a warm rack.
Managed levels: smart, web-managed, and L2+
An “easy smart” switch like the Cudy gives you basic port isolation, QoS, and LAG. A web-managed switch like the SODOLA or MokerLink adds proper 802.1Q VLAN tagging, IGMP snooping, and LACP. A full L2+ switch like the SG3210X-M2 adds static routing, so traffic between VLANs does not have to bounce through your router. For most homelabs, web-managed is the sweet spot.
Name brand versus off-brand
Nearly all budget 2.5G switches run on similar Realtek silicon, so what you are really buying is firmware quality and support. TP-Link and TRENDnet ship polished interfaces, real warranties, and years of firmware updates. Off-brands like SODOLA, MokerLink, and Real HD deliver remarkable hardware for the money but with brighter LEDs, buggier firmware, and higher early-failure rates. My advice: buy off-brand only from sellers with easy returns, and stress-test the unit hard in the first two weeks.
2.5GbE or 10GbE?
2.5GbE wins on cost, cable compatibility, and heat: it runs over the Cat5e you already have and needs no fans. 10GbE wins on raw throughput for VM storage networks and heavy backup jobs, but typically wants Cat6a or fiber and pricier NICs. My pragmatic answer is the hybrid approach used by most of these switches: 2.5G copper to endpoints, 10G SFP+ for uplinks and storage.
Realistic speed expectations
Do not expect the full 312 MB/s theoretical maximum on every transfer. In real use, 2.5GbE delivers roughly 260-300 MB/s between capable devices, up from the 110-120 MB/s you get on gigabit. Factors like disk speed, jumbo frame settings, and single-versus-multi-stream transfers all move the number. If you see dramatically less, check that your NIC, drivers, and cable all support multi-gig.
Frequently Asked Questions
What is the best managed switch for a homelab?
The TP-Link Omada ES210X-M2 is the best managed switch for most homelabs. It combines eight 2.5G ports, two 10G SFP+ uplinks, easy VLAN configuration, and integration with the free Omada Controller software, all in a fanless metal chassis with a 5-year warranty.
What is the best 2.5GB Ethernet switch for home networks?
The top three are the TP-Link Omada ES210X-M2 for full features and SFP+ uplinks, the TRENDnet TEG-S381 for lifetime-warranty reliability on an all-copper network, and the SODOLA 6-port for the best budget option with dual 10G SFP+ cages.
Is 2.5GbE or 10GbE better?
2.5GbE is better for most homes because it runs over existing Cat5e cabling, costs less per port, and needs no active cooling. 10GbE is better for storage networks and heavy VM traffic that needs the extra headroom. A common compromise is 2.5G copper to endpoints with 10G SFP+ uplinks and a NAS link.
What is the best Ethernet switch for a home network?
For a typical home network, the TRENDnet TEG-S381 is an excellent choice thanks to eight 2.5G ports, line-rate performance, cool quiet operation, and a lifetime warranty. If you want VLANs plus 10G uplinks for a homelab, choose the TP-Link Omada ES210X-M2 instead.
Conclusion
After three months and eight switches, my recommendation is simple. The TP-Link Omada ES210X-M2 is the best 2.5GbE managed switch for a homelab overall, the SODOLA 6-port wins on value if budget rules, and the TRENDnet TEG-S381 is the pick for anyone who prizes reliability and a lifetime warranty over uplink flexibility.
Whichever you choose, size up on ports, insist on SFP+ if you have any 10G gear, and burn in off-brand units hard during the return window. Your NAS transfers at 280 MB/s will thank you.